Victron Inverter Phoenix 12V/230V

Victron Inverter Phoenix 12V/230V 250VA-1200VA

VE.Direct communication port can be connected to:

• Through the VE.Direct to USB interface it can be connected to the computer
• Through the VE.Direct Bluetooth Smart dongle it can communicate with Smartphones, Tablets, MacBooks and other Apple and Android devices

Fully configurable:

• Low battery voltage alarm and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sensing level

Monitoring:

• Input and output voltage, load percentage and alarms

Reliability: The inverters are short circuit proof and protected from overheating due to overload or high ambient temperature.

High starting powerNeeded to start loads such as power converters for LED lamps, halogen lamps or electric tools.

Rated power — Peak Power

1. 250W 400W
2. 375W 700W
3. 500W 900W
4. 800W 1500W
5. 1200W 2200W

ECO modeIn ECO mode, the inverter will switch to standby when the load drops below a preset value (minimum load: 15W). Once instandby, the inverter will switch on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/offA remote on/off switch can be connected to a two-pole connector, or between the positive battery pole and the left contact of thetwo-pole connector.

LED diagnosisPlease refer to the manual for a description.

To transfer the load to another AC source: the automatic transfer switchFor our low power inverters, we recommend our Filax Automatic Transfer Switch. The Filax features a very short switch over time(less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

NOTE: Victron Inverter Phoenix 12V/230V 250VA-1200VA is only available with SCHUKO socket output