Tecfi DGE02 Two-Component Vinyl Ester Injection Resin

Two-component vinyl ester resin without styrene – ETA-CE certified and Performance Category C2-C1 for seismic zone fixings

Two-component vinyl ester injection resin, styrene-free, for heavy loads, available in the following formats:
DGE 02 00 400 – 400 ml with 1 mixer
to be used with professional gun (code DH 01; DH 03)

• Seismic evaluation in Performance Category C1 and C2 with standard threaded bars
• Certified for the application of reinforcing bars for construction joints in seismic zones and exposed to fire
• Certified application with threaded bars from class 4.8 up to 10.9, including hot-dip galvanized, Stainless steel A2, A4 and high corrosion resistance, from class 50 to class 80
• Certified use of bars with flat ends, single and double 45° cut
• Certified installation also with hollow drill bits
• Compliant with LEED® v4 Directives (Energy and Environmental Design)
• High load values
• Almost zero shrinkage after curing
• Long-term hydrolysis resistance
• No pre-mixing required
• Reduced edge and center-to-center distances
• Fast curing for quick and secure fixings

– STORAGE AND PRESERVATION:
Store in a cool, dry place between +5°C and +30°C
– INSTALLATION TEMPERATURE:
(concrete temperature)
-10°C to +40°C
– OPERATING TEMPERATURE:
(ambient temperature after installation)
-40°C to +40°C with long-term T0,max of +24°C
-40°C to +80°C with long-term T0,max of +50°C
-40°C to +120°C with long-term T0,max of +72°C