Fischer Mesh Sleeve DM 16x85mm

Fischer Mesh Sleeve DM 16x85mm designed for use in combination with chemical resins on perforated materials such as semi-solid bricks. It is designed to ensure uniform distribution of the resin within the support, optimizing the anchor’s hold.

Key Features:

• Mesh structure: allows the resin to expand inside the hollow brick, reducing material consumption and improving adhesion.
• Centering fins: facilitate precise insertion of the threaded rod, keeping it in position during installation.
• Ideal for hollow supports: the resin expands through the mesh and creates an effective mechanical anchorage, even in materials with voids.
• Usable in elevated positions: thanks to the shape of the anchor, it stays in place without falling during vertical application.

Technical specifications:

• Hole diameter: 16 mm
• Minimum hole depth: 95 mm
• Effective anchoring depth: 85 mm
• Compatible with threaded rods: from M6 to M12
• Required resin quantity: about 8 ml per sleeve

Typical applications: This anchor is suitable for installations on hollow masonry where strong hold with chemical resin is required, such as fixing railings, brackets, frames, and other light or medium structures.
Practical use: The injection of the resin should start from the bottom of the nylon mesh sleeve. Therefore, it is recommended to push the mixing nozzle to the bottom of the sleeve, injecting the resin regularly by pumping the gun gradually and slowly moving the nozzle up towards the surface to fill the entire sleeve.