Italiano
HT COMBI521EV Multifunction EVSE and Electrical Safety
€2.099,00 IVA esc.
HT COMBI521EV allows for electrical system verifications in compliance with CEI 64-8 and, with the EV-TEST100 adapter, enables checking of electric vehicle charging stations.
HT COMBI521EV allows for electrical system verifications in compliance with CEI 64-8:
- AUTOMATIC Test (Ra, RCD, Insulation) in sequence
- Continuity of protective conductors at 200mA
- Insulation Resistance up to 1000V
- Polarity test
- RCD tests for type A/F, AC, B/B+ General and Selective, and type DD, CCID
- Line impedance measurement and presumed short-circuit current
- Verification of circuit breakers and fuses
- Multimeter function for measuring: Frequency, VL-N, VL-PE, VN-PE
- Phase sequence
- Voltage drop
- Leakage currents (with optional HT96U clamp)
- Network analysis
- Environmental parameter measurements
While if HT COMBI521EV is combined with EV-TEST100, it allows for verifying and checking electric vehicle charging stations (EVSE) in accordance with IEC/EN 61851-1 and IEC/EN 60364-7-722 standards.
Additionally, HT COMBI521EV can connect to the HT Analysis App via integrated WiFi, allowing results to be downloaded and viewed on a PC or Tablet.
The package includes:
- HT COMBI521EV
- EV-TEST100 Adapters for electric vehicle charging station verification
- SP-5100 Set of straps for shoulder use of the instrument
- C2033X Cable with Green – Black – Blue banana plugs and Italian plug
- UNIVERSALKIT COMBI Set of 3 cables, 3 crocodile clips, and 3 probes in Black – Green – Blue
- YABAT0003000 Rechargeable battery
- YABAT0004001 External battery charger
- C2006 + Downloadable TOPVIEW Software
- VA507 Hard Case
- Quick Guide, Downloadable Manual, Calibration Certificate
| Weight | 7,37 kg |
|---|---|
| Dimensions | 43 × 32 × 60 cm |
| Brand | |
| EV-TEST100 Compatibility | YES |
| Insulation Measurement | 1000VDC, 100VDC, 250VDC, 500VDC, 50VDC |
| Continuity of protective conductors PE | Yes up to 10A with EQUITEST (optional), Yes up to 200mA |
| RCD tripping time | A, AC, F up to 1A, B and B+ up to 300mA, Delayed, General, Selective |
| RCD tripping current | A and F up to 650mA, AC up to 1A, B, B+ up to 300mA, General, Selective |
| RCD measurement mode | Auto, Manual, Ramp |
| Overall Earth resistance | Yes |
| Ground resistance using the volt-ampere method | NO |
| Resistance of individual earth electrodes with clamp | NO |
| Ground resistivity | NO |
| Line/Loop Impedance | L-L, L-N, L-PE, Resolution 0.1mOhm, optional with IMP57. |
| Voltage drop measurement | YES |
| Phase Rotation | YES |
| Leakage current | Optional with HT96U clamp |
| Inrush current | NO |
| Power Quality | Real time only, V, I, P, Q, S, Cosphi, Pf, THD%, Harmonics |
| Measurement category | CAT IV 300V |
| Environmental data monitoring | Lux with optional probe HT53/05, Temperature with optional probe HT52/05 |
| Internal memory | YES |
| Display | Backlit LCD |
| Connectivity | HT Analysis APP, Optical/USB, Wi-Fi |
| Power Supply | 6XAA |
| Height (mm) | 225 |
| Width (mm) | 165 |
| Depth (mm) | 75 |
| Weight (kg) | 1.2 |
