Victron Inverter Phoenix 24V/230V

Victron Inverter Phoenix 24V/230V 250VA-1200VA

VE.Direct communication port can be connected to:

• Through the VE.Direct to USB interface it can be connected to the computer
• Through the VE.Direct Bluetooth Smart dongle it can communicate with Smartphones, Tablets, MacBooks and other Apple and Android devices

Fully configurable:

• Low battery voltage alarm and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load-dependent cut-off level
• Output voltage 210 – 245V
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode sensing level

Monitoring:

• Input and output voltage, load percentage and alarms

Reliability:
The inverters are short-circuit proof and protected from overheating due to overload or high ambient temperature.

High starting power
Necessary to start loads such as power converters for LED lamps, halogen lamps or power tools.

Rated Power --> Peak Power

1. 200W 400W
2. 300W 700W
3. 400W 900W
4. 650W 1500W
5. 1000W 2200W

Eco mode
In ECO mode, the inverter will switch to standby when the load drops below a preset value (minimum load: 15 W). Once in
standby, the inverter will turn on for a brief period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off
It is possible to connect a remote on/off switch to a two-pole connector, or between the positive battery pole and the left contact of the
two-pole connector.

LED diagnostics
Please consult the manual for a description.

To transfer the load to another AC source: the automatic transfer switch
For our low-power inverters, we recommend our Filax automatic transfer switch. The Filax features a very short switching time
(less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

NOTE: Victron Inverter Phoenix 24V/230V 250VA-1200VA is only available with SCHUKO socket output